TallyGenicom 2440 User Guide

4-6

Options with Pre-determined Values

For some options, you can choose among a limited set of pre-determined values. To se-
lect such a value:

Repeatedly press the PARK/PRINT/

T

 key or the TEAR/

S

 key to position the 

value you require.

Press the FF/LOAD/Micro Feed Up/

X

 key to select the function. The printer 

prints the first parameter.

Press the SEL/MENU key to select the desired value and to activate the 
SAVE&EXIT position.

Press the SEL/MENU key again to save the new value and exit the Set-Up mode.

`

The printer exits the Set-Up mode and returns to the ready mode. The selected values 
remain in effect until the next time they are changed.

Example: Changing the Vertical Pitch
To become familiar with the Set-Up mode, try the following example. This example shows 
how to change the vertical pitch in COMMON (PUSH TRAC) from 6 lines per inch to 8 
lines per inch.

Enter the Set-Up mode: Turn the printer off and back on while pressing the SEL/
MENU key.

Select the COMMON (PUSH TRAC) function: Wait for the printer to stop print-
ing and press the PARK/PRINT/

T

 key five times to print the COMMON (PUSH 

TRAC) function.

Press the FF/LOAD/Micro Feed Up/

X

 key to print the PAPER SET parameter.

Press the PARK/PRINT/

T

 key to print the LPI parameter.

Press the FF/LOAD/Micro Feed Up/

X

 key to print the current LPI value (default: 

6 LPI).

Change the vertical pitch from 6 to 8 lines per inch. Press the PARK/PRINT/

T

 

key once to position the 8 LPI. Press the SEL/MENU key to select 8 LPI.

Press the SEL/MENU key to select 8 LPI and to activate the SAVE&EXIT posi-
tion.

Press the SEL/MENU key again to save the new value and exit the Set-Up mode 
and return to the Ready state. This setting remain in effect until the next time they are 
changed.