TallyGenicom 2440 User Guide

4-11

SET-UP menu

PRINT DIR

UNIDIR/UNIDIR(G)/
BIDIR/SOFT CONTROL

Unidirectional printing is used for print-
ing that needs precise vertical alignment. 
Unidirectional printing is slower than bi-
directional printing.
Bi-directional printing: The printer 
prints in either direction while seeking 
the next print direction for a shorter 
print time. The unidirectional com-
mand is ignored.
The print direction follows a command 
from the computer. If no command is 
sent, print direction is bi-directional.

CR CODE

CR=CR
CR=LF+CR

Specify the effect of CR (Carriage 
Return) code.
CR=CR: No line feed is added to a car-
riage return
CR=LF+CR: A line feed is added to 
each carriage return.

LF CODE

LF=LF
LF=LF+CR

Specify the effect of  LF (Line Feed) 
code.
LF=LF: No carriage return is added to a 
line feed.
LF=LF+CR: A carriage return is added 
to each line feed.

TIME OUT 
PRINT

NO
YES

Prints out the data in the buffer after a 
short time, even without a print com-
mand.

LANGUAGE

ENGLISH/GERMAN/
SPAIN/FRENCH/
ITALIAN

Specifies a language to be used to print 
the Set-Up menu functions and options 
(status page).

SAFE PANEL

NO
LIMITED

If the parameter LIMITED is selected, 
the access to Set-Up menu is restricted.
NOTE: For more information refer to 
the section 

IMPACT

1/2/3/4/5/6/7/8

Selects the impact strength of the print-
head (1 = light). This ensures that single 
or copy paper produces optimum 
results.
6: for single-ply paper.
7: for 2- or 3-ply paper
8: for 4-ply paper and above