TallyGenicom 2440 Guia Do Utilizador
Special mode
Set-Up mode
4-11
SET-UP menu
Parameter
Value
Description
PRINT DIR
UNIDIR/UNIDIR(G)/
BIDIR/SOFT CONTROL
BIDIR/SOFT CONTROL
Unidirectional printing is used for print-
ing that needs precise vertical alignment.
Unidirectional printing is slower than bi-
directional printing.
Bi-directional printing: The printer
prints in either direction while seeking
the next print direction for a shorter
print time. The unidirectional com-
mand is ignored.
The print direction follows a command
from the computer. If no command is
sent, print direction is bi-directional.
ing that needs precise vertical alignment.
Unidirectional printing is slower than bi-
directional printing.
Bi-directional printing: The printer
prints in either direction while seeking
the next print direction for a shorter
print time. The unidirectional com-
mand is ignored.
The print direction follows a command
from the computer. If no command is
sent, print direction is bi-directional.
CR CODE
CR=CR
CR=LF+CR
CR=LF+CR
Specify the effect of CR (Carriage
Return) code.
CR=CR: No line feed is added to a car-
riage return
CR=LF+CR: A line feed is added to
each carriage return.
Return) code.
CR=CR: No line feed is added to a car-
riage return
CR=LF+CR: A line feed is added to
each carriage return.
LF CODE
LF=LF
LF=LF+CR
LF=LF+CR
Specify the effect of LF (Line Feed)
code.
LF=LF: No carriage return is added to a
line feed.
LF=LF+CR: A carriage return is added
to each line feed.
code.
LF=LF: No carriage return is added to a
line feed.
LF=LF+CR: A carriage return is added
to each line feed.
TIME OUT
PRINT
NO
YES
YES
Prints out the data in the buffer after a
short time, even without a print com-
mand.
short time, even without a print com-
mand.
LANGUAGE
ENGLISH/GERMAN/
SPAIN/FRENCH/
ITALIAN
SPAIN/FRENCH/
ITALIAN
Specifies a language to be used to print
the Set-Up menu functions and options
(status page).
the Set-Up menu functions and options
(status page).
SAFE PANEL
NO
LIMITED
LIMITED
If the parameter LIMITED is selected,
the access to Set-Up menu is restricted.
NOTE: For more information refer to
the section
the access to Set-Up menu is restricted.
NOTE: For more information refer to
the section
IMPACT
1/2/3/4/5/6/7/8
Selects the impact strength of the print-
head (1 = light). This ensures that single
or copy paper produces optimum
results.
6: for single-ply paper.
7: for 2- or 3-ply paper
8: for 4-ply paper and above
head (1 = light). This ensures that single
or copy paper produces optimum
results.
6: for single-ply paper.
7: for 2- or 3-ply paper
8: for 4-ply paper and above