TallyGenicom 2440 User Guide

5-2

Open the cover of the printer and the protective cover of the platen and remove the 
ribbon cartridge. Using a soft vacuum brush, gently vacuum the platen, the print head 
carriage and shaft, and surrounding areas. You can easily slide the print head to the 
left or right when the power is off. Be careful not to press too hard on the flat ribbon 
cable that extends from the print head carriage.

Re-install the ribbon cartridge (see “Installing the Ribbon Cartridge” on page 5-5).

Remove the single sheet feeder and clean the form tractors and the surrounding 
areas.

Re-install the single sheet feeder.