Allied Telesis AT-CV5000 AT-CV5000-50 Data Sheet
Product codes
AT-CV5000-50
Datasheet |
Media Converters
AT-CV5000
18 slot Converteon chassis
Overview
The AT-CV5000 is one of a family of metal
chassis designed to house 1, 2 or 18
Converteon media blades.The AT-CV5000 is
the 18 slot chassis, AT-CV1203 is the two slot
chassis and AT-CV1000 is the one slot chassis.
chassis designed to house 1, 2 or 18
Converteon media blades.The AT-CV5000 is
the 18 slot chassis, AT-CV1203 is the two slot
chassis and AT-CV1000 is the one slot chassis.
Power Options
All the Converteon power supplies are hot
swappable and modular, installing two into a
chassis provides redundancy should a single
power supply fail. In an unmanaged chassis, the
status of each power is displayed via an LED
indicator on the front panel, and via an LED on
the power supply module at the rear. A fully
loaded chassis can run continuously with only
one power module fitted into the chassis.
swappable and modular, installing two into a
chassis provides redundancy should a single
power supply fail. In an unmanaged chassis, the
status of each power is displayed via an LED
indicator on the front panel, and via an LED on
the power supply module at the rear. A fully
loaded chassis can run continuously with only
one power module fitted into the chassis.
Redundancy
To further increase system reliability, the
AT-CV5000 chassis is fitted with two hot
swappable fan modules. Both fan modules can
be easily removed from the rear of the chassis,
without interruption to the operation of the line
cards. A fully loaded chassis can run continuously
with only one fan module fitted into the chassis
AT-CV5000 chassis is fitted with two hot
swappable fan modules. Both fan modules can
be easily removed from the rear of the chassis,
without interruption to the operation of the line
cards. A fully loaded chassis can run continuously
with only one fan module fitted into the chassis
•
AT-CVFAN Fan module
Network Management
The AT-CV5000 chassis can operate in an
unmanaged mode, by the installation of any
number of media blades. Blades will be
configured manually using DIP switches located
on each blade. Alternatively, an SNMP
management card can be installed into one of
the slots in the chassis, which will provide a
network administrator with the ability to
configure and monitor the status of the blades.
Management can be achieved locally over
RS232, or over the network by Telnet or SNMP.
unmanaged mode, by the installation of any
number of media blades. Blades will be
configured manually using DIP switches located
on each blade. Alternatively, an SNMP
management card can be installed into one of
the slots in the chassis, which will provide a
network administrator with the ability to
configure and monitor the status of the blades.
Management can be achieved locally over
RS232, or over the network by Telnet or SNMP.
If the blades support Ethernet in the First Mile
(IEEE 802.3ah), then the management module
can also configure and monitor the status of a
remote blade.
(IEEE 802.3ah), then the management module
can also configure and monitor the status of a
remote blade.
•
AT-CM501 Management card
Chassis Status
If the AT-CV5000 has a management card
installed, then a network administrator can also
check the status of the chassis, the status of the
fans and the power supply modules. By ensuring
the continued performance of all components in
the chassis, the overall reliability of the network
can be improved.
installed, then a network administrator can also
check the status of the chassis, the status of the
fans and the power supply modules. By ensuring
the continued performance of all components in
the chassis, the overall reliability of the network
can be improved.
Protocol Agnostic
The AT-CV5000 chassis has been designed to
be protocol, and speed agnostic.This allows
network administrators to deploy the chassis in
a wide range of network topologies in addition
to only Ethernet-based networks.Technologies
supported by the chassis include Ethernet, Fast
Ethernet, Gigabit, E1/T1 and serial
communications.
be protocol, and speed agnostic.This allows
network administrators to deploy the chassis in
a wide range of network topologies in addition
to only Ethernet-based networks.Technologies
supported by the chassis include Ethernet, Fast
Ethernet, Gigabit, E1/T1 and serial
communications.
Hassle Free Support
The Allied Telesis AT-CV5000 Converteon
chassis offers free technical support, ensuring
trouble-free installation.
chassis offers free technical support, ensuring
trouble-free installation.
Key Features
•
18 slot media and rate converter chassis
•
Single, or optional redundant power supplies
•
Hot swappable power supplies
•
Hot swappable fan modules
•
Support for unmanaged or managed operation
•
Requires only 2RU of rack space
•
19” rack-mountable
AT-CV5000
Converteon
TM
Chassis
Allied Telesis
www.alliedtelesis.com