Lexmark X952dte User Guide

UAA
LAA

Lets you view the network addresses

0

10–225

Sets the amount of time in seconds before a network print job is canceled

Note: 90 seconds is the factory default setting.

Off

On

Allows the printer to print a banner page

Note: Off is the factory default setting.

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > TCP/IP

Note: This menu is available only in network models or printers attached to print servers.

On
Off

Activates TCP/IP

Note: On is the factory default setting.

Lets you set the current TCP/IP hostname

Note: This can be changed only from the Embedded Web Server.

Lets you view or change the current TCP/IP address

Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.

Lets you view or change the current TCP/IP netmask

Lets you view or change the current TCP/IP gateway

On
Off

Specifies the DHCP address and parameter assignment setting

Note: On is the factory default setting.

On
Off

Specifies the RARP address assignment setting

Note: On is the factory default setting.

On
Off

Specifies the BOOTP address assignment setting

Note: On is the factory default setting.

Yes
No

Specifies the Zero Configuration Networking setting

Note: Yes is the factory default setting.

Understanding printer menus

165