Lexmark X952dte User Guide

Off
On

Creates a negative image of the original document

Note: Off is the factory default setting.

‑4 to 4

Adjusts the amount of shadow detail visible on a scanned image

Note: 0 is the factory default setting.

Off
On

Specifies whether the original document is scanned edge-to-edge

Note: Off is the factory default setting.

1–5

Adjusts the amount of sharpness on a scanned image

Note: 3 is the factory default setting.

‑4 to 4

Enables the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer
output than the default while “warm” values generate a redder output than the
default.

1–999

Specifies a default number of copies for each print job

Note: 1 is the factory default setting.

Tray [x]
MP Feeder
Manual Paper
Manual Envelope

Sets a default paper source for all print jobs

Note: Tray 1 is the factory default setting.

Color
Black Only

Specifies whether copies are printed in color or black

‑and‑white

Note: Color is the factory default setting.

On (1,2,1,2,1,2)
Off (1,1,1,2,2,2)

Stacks the pages of a print job in sequence when printing multiple copies

Note: On is the factory default setting.

1 sided
2 sided

Specifies whether prints are on one side or on both sides of the page

Note: 1 sided is the factory default setting.

Off
Auto
Back
Dual
Dual Double
Front

Specifies whether prints are stapled

Off is the factory default setting.

This menu appears only when a stapler is installed.

Understanding printer menus

217