Bosch she43c02uc User Manual

You may not be correctly shutting the

detergent dispenser cover, or a cycle
was not finished and should be
cancelled. Go to the Adding Detergent
and Rinse Agent section of this manual
for instructions on shutting the dteregent
dispenser cover. Go to the Operating the
Dishwasher section of this manual for
instructions on cancelling a cycle.

More rinse agent is needed. Go to the

Adding Detergent and Rinse Agent
section of this manual for instructions on
increasing the amount of rinse agent
dispensed.

Too much rinse agent is being

dispensed. Go to the Adding Detergent
and Rinse Agent section of this manual
for instructions on decreasing the
amount of rinse agent dispensed.

Utensils may not be properly arranged.

You may have used the wrong type of

dishwashing detergent. Use only
automatic dishwasher detergents.

• Incorrect amount of detergent.
• Utensils incorrectly arranged or rack

overloaded.

• Spray arm rotation blocked by

utensils.

• Spray arm nozzles need cleaning.
• Filters not properly fitted into

position.

• Unsuitable cycle selected.

Dishwashers may occasionally exhibit

problems that are unrelated to a
malfunction of the dishwasher itself. The
following information may help you with a
dishwasher problem without your having
to call a repair person.

The rinse agent dispenser may be

empty. Check the rinse-aid dispenser and
refill it if necessary. Dishware drying can
be accelerated and enhanced by opening
the dishwasher door slightly and propping
it open with the top rack.

Indicator light(s) do not come on

A fuse may have blown or a circuit

breaker tripped. Check the fuse or circuit
breaker at your fuse box/breaker box and
replace the fuse or reset the breaker if
necessary.

The dishwasher door may not be

properly shut. Make certain the
dishwasher door is shut and latched.

Dishwasher runs a long time

If the dishwasher completes the cycle,

but the run time seems exceptionally
long, it may be due to cold incoming
water. Before starting the dishwasher,
open the hot water faucet at the sink
nearest the dishwasher. Run the water
until it runs hot, then turn off the water
and start the dishwasher.

Machine cycle does not advance to
rinse

: The Installation Manual that

came with your Bosch dishwasher will
help you with the following instructions.

The water supply line may be shut off.

Check the water supply valve and open it
if it’s shut.

Water not pumped from
dishwasher

Make certain the drain hose isn’t

kinked, clogged, or improperly installed.
Make certain a portion of the drain hose
is at least 20 inches above the
dishwasher’s enclosure floor (see the
Installation Manual). Filters may be
clogged. Make certain the filter system
isn’t clogged (see the Care and
Maintenance section of this manual).
The kitchen sink drain may be clogged;
you may need a plumber rather than a
serviceman for the dishwasher. If an air
gap is installed at sink, it may be
clogged.

a) Use only a soft cloth that is lightly

dampened with soapy water.

b) Use a soft cloth with a non-abrasive

cleaner (preferably a liquid spray) made
for cleaning stainless steel. For the best
results, apply the stainless steel cleaner
to the cloth, then wipe the surface.

a) Regularly clean the door gasket

with a damp cloth to remove food
particles and other debris.