Audiovox ce3000ht Instruction Manual

CAUTION:
• Before making connection, check that the rated voltage of your unit matches your local voltage.
• Keep your hands dry when you are connecting the power cord to the wall outlet in case of electric shock.
• When you are not going to use the unit for a long period of time, disconnect the power cord.

1. The speaker cords have been color-cord to simplify connection. Just plug the POSITIVE (+) and NEGATIVE

(-) ends of each speaker wire into the corresponding jacks on the rear of the main unit, matching the color
tube on the end of the speaker wire to the color-cord connector.

2. Connect each of the speaker wires to the satellite speakers. The front left/right and rear left/right speakers

are all the same. However, make sure you connect the center speaker (color) to the speaker which is
slightly longer than the rest.

3. Do not  connect the other speakers to the subwoofer internals, it may damage the speakers.

CAUTION:
To prevent damage to the unit, be sure to turn off the unit before making any connection.

1. Mark the correct mounting position on the wall.
2. Insert a fixing screw(s) at the marked position on the wall.
3. Align the slot hole(s) of the speaker over the screw and pull the speaker downward until it is firmly hooked.

4