Audiovox ce3000ht Instruction Manual

5

Can be placed anywhere.

Place right beside or slightly behind your
listening position, and a little higher than
your ears.

Place on the top of or below the TV.

Place both sides of the TV,

equal distances apart.

Dolby Pro Logic is a sound system that was developed to get a better sense of presence from sources
encoded with Dolby Surround. The feeling of position has been improved by the addition of a separate center
speaker channel. Look for this logo on the display of your unit.

Dolby Digital is a sound system developed  by Dolby Laboratories Inc. which gives movie theatre ambience
to audio output when the unit is connected to a Dolby Digital 5.1 channel processor or amplifier.This unit
automatically recognizes DVDs that have been recorded with Dolby Digital.Not all Dolby Digital sources are
recorded with 6 channel.Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel
system. Look for this logo on your DVD unit.

REMARKS:
1. "O" The speaker is active." X " The speaker is inactive.
2. Generally, only Front Left, Right speakers and Subwoofer are active in TUNER mode.
3. 3 STEREO mode creates a surround sound effect without using the rear speakers. In this mode, no sound

comes from the rear speakers.

In AV1 and AV2 input mode, the unit can auto-detect the sound source mode (analog or digital), and auto-
switch to this mode, to enter forced analog input mode, press the corresponding button on the front panel
again. In force analog input mode, it will input the signal from the analog input and will not auto-switch to digital
input. This allows you force to use the analog input.
You can press the SURROUND button repeatedly on the remote control to change the sound output status.
Please see the table below.