Partner Tech pt-5700 User Manual

Integrated Peripherals

VIA OnChip IDE Device

Use this item to enable or disable the PCI IDE channels that are integrated on the mainboard. Select the item and press
<Enter> to open the following menu:

Figure 3.9

VIA OnChip IDE Device menu

On-Chip SATA

Use these items to enable or disable the PCI IDE channels that are integrated on the mainboard. The default setting for
both fields is Enabled.

SATA Mode

IDE: Select onboard Seria ATA function as IDE.(Default value)

RAID: Select onboard Seria ATA function as RAID..

OnChip IDE Channel0

Enabled: Enable onboard 1st channel IDE port. (Default value)

Disabled: Disable onboard 1st channel IDE port.

OnChip IDE Channel1

Enabled: Enable onboard 2nd channel IDE port. (Default value)

Disabled: Disable onboard 2nd channel IDE port.

IDE Prefetch Mode

The onboard IDE drive interfaces supports IDE prefetching, for faster drive access. If you install a primary and sec-
ondary add-in IDE interface, set this field to Disabled if the interface does not support prefetching. The default setting
is Enabled.

IDE Primary/Secondary Master/Slave PIO

Each IDE channel supports a master device and a slave device. These four items let you assign which kind of PIO
(Programmed Input/Output) is used by IDE devices. Choose Auto to let the system auto detect which PIO mode is
best, or select a PIO mode from 0-4. The default setting is Auto.