Partner Tech pt-5700 User Manual
Integrated Peripherals
33
ON: Set on to USB emulation. (Default value)
USB Keyboard Support
Enable this item if you plan to use a keyboard connected through the USB port in a legacy operating system (such as
DOS) that does not support Plug and Play. The default setting is Enabled.
DOS) that does not support Plug and Play. The default setting is Enabled.
Press <Esc> to return to the Integrated Peripherals menu.
SuperIO Device
Use this item to change settings for I/O devices. Select the item and press <Enter> to open the following menu:
Figure 3.11
Super I/O Device menu
Onboard Serial Port 1
This option is used to assign the I/O address and IRQ for the onboard serial port 1 (COM1). The default setting is 3F8/
IRQ4.
IRQ4.
Onboard Serial Port 2
This option is used to assign the I/O address and IRQ for the onboard serial port 2 (COM2). The default setting is 2F8/
IRQ3.
IRQ3.
UART Mode Select
This item allows you to determine which ItDA function of Onboard I/O chip.
Normal: Disable IrDA function.
IrDA: Enable IrDA Function.
ASKIR: Enable ASKIR mode, with 56Kbps transfer rate.
SCR: CRE in synchronous slave mode only