Alcatel-Lucent 6850-48 Reference Guide

MPLS LDP Commands

page 24-34

OmniSwitch CLI Reference Guide

LDP Service FEC 128 Bindings

Type   VCId       SvcId      SDPId  Peer            IngLbl  EgrLbl  LMTU  RMTU           

------+----------+----------+------+---------------+-------+-------+-----+-----

V-Eth  100        100        10     10.11.0.6       131069U 131070  1514  1500 

No. of VC Labels: 1

LDP Service FEC 129 Bindings

AGI                                 SAII                    TAII                         

Type              SvcId      SDPId  Peer            IngLbl  EgrLbl  LMTU  RMTU           

------+----------+----------+------+---------------+-------+-------+-----+-----

No Matching Entries Found

Release 6.4.2; command was introduced. 

The IP network address and mask used to identify the prefix binding.

The IP address of the LDP peer.

The type of service (V-Eth) exchanging labels through the Service 
Distribution Point (SDP). 

The virtual connection (VC) ID number used by each end of the SDP 
tunnel to identify the VC.

The unique service identification number used to identify the service.

The SDP ID number associated with the service.

The ingress LDP label.

The egress LDP label.

The Label Switch Path (LSP) tunnel ID number (not the LSP path ID 
number).

The next hop IP address for the egress label.

The local MTU number.

The remote MTU number.