Alcatel-Lucent 6850-48 Reference Guide

MPLS LDP Commands

page 24-36

OmniSwitch CLI Reference Guide

Displays the LDP bindings for a specific type of Forwarding Equivalence Class (FEC) or for a specific 
service FEC number. 

show router ldp bindings fec-type {fec-number | services | prefixes} [session ip-address[:label-space]]

Displays bindings for service FECs.

Displays bindings for address FECs.

The service FEC number. Valid numbers are 128 and 129.

The LDP router ID (Loopback0 IP address configured for the switch) 
for a specific LDP session.

The label space ID number that the router advertises on the LDP inter-
face. This value is appended to the LDP router ID address. The valid 
range is 0–65535.

By default, LDP bindings are displayed for all LDP sessions associated with the specified FEC type.

OmniSwitch 9000E

• Specify an FEC number to display label binding information for a specific FEC.

• Use the services parameter to display label binding information for service FECs. Note that only VPLS 

is supported.

• Use the prefixes parameter to display label binding information for address FECs. These are FECs that 

are associated with an IP address, instead of a service.

• Use the session parameter to display label binding information for a specific LDP router session. Note 

that entering a label-space value is optional with this parameter.

->show router ldp bindings fec-type 128

LDP LSR ID: 10.10.10.5

Legend: U = Label In Use, N = Label Not In Use, W = Label Withdrawn,

        S = Status Signaled Up,  D = Status Signaled Down,

        E = Epipe Service, V = VPLS Service, M = Mirror Service,

        A = Apipe Service, F = Fpipe Service, I = IES Service, R = VPRN service,

        P - Ipipe Service

        TLV = (Type, Length: Value)