Alcatel-Lucent 6850-48 Reference Guide

Virtual Private LAN Service (VPLS) Commands

OmniSwitch CLI Reference Guide

page 26-67

• Disabling the SAP administrative status does not remove the SAP configuration from the router.

• If an access port goes down, all SAPs associated with that port are operationally taken down as well.

• A SAP does not appear operationally down when a service is shutdown, even though traffic for that 

service is discarded.

-> configure service vpls 10 sap 1/2:10 no shutdown

-> configure service vpls 13 linkagg 20 no shutdown

-> configure service vpls 10 sap 1/2:10 shutdown

-> configure service vpls 13 linkagg 20 shutdown

Release 6.4.2; command was introduced.

sapBaseInfoTable

sapPortId

sapEncapValue

sapAdminStatus

sapOperStatus

svcBaseInfoTable

svcId

Configures a SAP by associating a SAP ID with a Virtual Private 
LAN Service (VPLS). 

Configures a description for the specified SAP ID.

Configures the trust mode for the specified SAP ID.

Configures a static MAC address entry in the forwarding data-
base for the service that is associated with the specified SAP ID.

Displays configuration information about the Service Access 
Points (SAPs) associated with the specified service.

Displays the SAP configuration for the local router.