Alcatel-Lucent 6850-48 Reference Guide

Virtual Private LAN Service (VPLS) Commands

OmniSwitch CLI Reference Guide

page 26-69

• Static MACs associated with a SAP are classified as local MACs. A local MAC is used by the associ-

ated VPLS so that MAC addresses are not learned on the edge device.

• A MAC address can participate in only one static MAC address entry (local or remote) for a specific 

VPLS.

• Static MAC addresses configured on one edge device are not propagated to other edge devices associ-

ated with the same VPLS instance. Each edge device has an independent forwarding database for the 
associated VPLS.

-> configure service vpls 100 sap 1/2:10 static-mac 00:00:da:3e:44:01

-> configure service vpls 101 sap linkagg 20:all static-mac 00:01:95:44:2a:10

-> configure service vpls 100 sap 1/2:10 no static-mac 00:00:da:3e:44:01

-> configure service vpls 101 sap linkagg 20:all no static-mac 00:01:95:44:2a:10

Release 6.4.2; command was introduced.

tlsFdbInfoTable

tlsFdbMacAddr 

tlsFdbType 

tlsFdbLocale 

sapBaseInfoTable

sapPortId

sapEncapValue

svcBaseInfoTable

svcId

Configures a SAP by associating a SAP ID with a Virtual Private 
LAN Service (VPLS). 

Configures a description for the specified SAP ID.

Configures the trust mode for the specified SAP ID.

Configures the administrative status for the specified SAP ID.

Displays configuration information about the Service Access 
Points (SAPs) associated with the specified service.

Displays the SAP configuration for the local router.