Alcatel-Lucent 6850-48 Reference Guide
BFD Commands
page 39-12
OmniSwitch CLI Reference Guide
September 2009
ip bfd-std interface transmit
Configures the transmit time interval for the BFD interface. This command specifies the minimum amount
of time BFD waits between each transmission of control packets from the interface.
of time BFD waits between each transmission of control packets from the interface.
ip bfd-std interface interface_name transmit transmit-interval
Syntax Definitions
interface_name
The name of an existing BFD interface.
transmit-interval
The transmit time interval, in milliseconds. The valid range is 100–999.
Defaults
The global transmit time interval value is used by default.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• The global transmit time interval serves as the default interval value for a BFD interface. The default
interval value is overridden when a specific value is configured for the interface.
• Note that configuring the interface transmit time interval using the ip bfd-std interface transmit
command does not change the global value configured with the ip bfd-std transmit command.
Examples
-> ip bfd-std interface bfd-vlan-101 transmit 500
Release History
Release 6.3.4; command was introduced.
Related Commands
MIB Objects
alaBfdIntfTable
alaBfdIntfDesiredMinTxInterval
Creates a BFD interface.
Configures a global BFD transmit time interval.
Displays the status and statistics of a BFD interface.
Displays the status and statistics of the BFD sessions.