Alcatel-Lucent 6850-48 Reference Guide
BFD Commands
OmniSwitch CLI Reference Guide
September 2009
page 39-13
ip bfd-std interface receive
Configures the receive time interval for the BFD interface. This command specifies the minimum amount
of time BFD waits to receive control packets on the interface before determining there is a problem.
of time BFD waits to receive control packets on the interface before determining there is a problem.
ip bfd-std interface interface_name receive receive-interval
Syntax Definitions
interface_name
The name of an existing BFD interface.
receive-interval
The receive time interval, in milliseconds. The valid range is 100–999.
Defaults
The global receive time interval value is used by default.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• The global receive time interval serves as the default interval value for a BFD interface. The default
interval value is overridden when a specific value is configured for the interface.
• Note that configuring the interface transmit time interval using the ip bfd-std interface receive
command does not change the global value configured with the ip bfd-std receive command.
Examples
-> ip bfd-std interface bfd-vlan-101 receive 500
Release History
Release 6.3.4; command was introduced.
Related Commands
MIB Objects
alaBfdIntfTable
alaBfdIntfMinRxInterval
Creates a BFD interface.
Configures a global BFD receive time interval.
Displays the BFD interface configuration table.
Displays the BFD interface configuration table.