Alcatel-Lucent 6850-48 Reference Guide
Network Time Protocol Commands
OmniSwitch CLI Reference Guide
September 2009
page 5-23
Release History
Release 6.4.2; command was introduced.
Related Command
MIB Objects
alaNtpPeerListTable
alaNtpPeerShowOriginateTime
alaNtpPeerShowTransmitTime
alaNtpEnable
alaNtpBroadcastEnable
alaNtpBroadcastDelay
alaNtpPeerTests
alaNtpPeerStratum
alaNtpPeerTests
alaNtpAuthenticate
alaNtpSrcIpConfig
alaNtpSrcTp
server qualification
Server qualification status.
Stratum
The stratum of the server. The stratum number is the number of hops
from a UTC time source.
from a UTC time source.
Max-Association
Maximum association on the switch that restricts the number of client/
server and peer association
server and peer association
Authentication
Whether Authentication is enabled or disabled
Source IP Configuration
Source IP Configuration type which is configured.
Source IP
Source IP address for NTP that send updates to clients.
Enables or disables NTP operation on the switch.
Specifies an NTP server from which the switch will receive updates
Enables an NTP client to invoke tests for NTP server synchronization
as specified by the NTP protocol.
as specified by the NTP protocol.
Configures the maximum number of associations on the switch.
Specifies the stratum value for unsynchronized switch
Enables or disables the client’s broadcast mode.
Displays information about the current client NTP configuration.
Displays a list of the servers with which the NTP client synchronizes
Displays the basic server information for a specific NTP server or a list
of NTP servers
of NTP servers