Alcatel-Lucent 6850-48 Reference Guide
Network Time Protocol Commands
page 5-24
OmniSwitch CLI Reference Guide
September 2009
show ntp client
Displays information about the current client NTP configuration.
show ntp client
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
This command displays the current configuration parameters for the NTP client. The display is slightly
different depending on what has been configured on the client. See the Examples section for more infor-
mation.
different depending on what has been configured on the client. See the Examples section for more infor-
mation.
Examples
-> show ntp client
Current time : SAT APR 16 2005 00:19:02 (UTC)
Last NTP update : SAT APR 16 2005 00:06:45 (UTC)
Client mode : enabled
Broadcast client mode : disabled
Broadcast delay (microseconds): 4000
Release History
Release 6.1; command was introduced.
output definitions
Current time
The current time for the NTP client.
Last NTP update
The time of the last synchronization with an NTP server.
Client mode
Whether the NTP client software is enabled or disabled.
Broadcast client mode
What NTP mode the client is running in, either client or broadcast.
Broadcast delay
The number of microseconds in the advertised broadcast delay time.
This field is absent if the client broadcast mode is disabled.
This field is absent if the client broadcast mode is disabled.
Server Qualification
Indicates whether they server must be synchronized or not.