Alcatel-Lucent 6850-48 Reference Guide

PIM Commands

OmniSwitch CLI Reference Guide

page 45-41

Release 6.1.1; command was introduced.
Release 6.3.1; join/prune field was removed.

alaPimdmGlobalConfig

alaPimdmAdminStatus

alaPimKeepalivePeriod

alaPimRefreshInterval

alaPimdmStateRefreshLimitInterval

alaPimdmStateRefreshTimeToLive

The current global (i.e., switch-wide) status of PIM-DM. Options 
include enabled and disabled. 

The duration of the Keepalive or Source Lifetime timer. The default 
value is 210.

The time-interval, in seconds, between successive State Refresh mes-
sages originated by the router. The default value is 60. 

Displays the limit at which a router will not forward the State Refresh 
messages, if they are received at less than the interval. 

Displays the TTL to be used in the router’s originated State Refresh 
messages. The default value is 16. 

Globally enables or disables PIM-DM protocol on the switch.

Enables or disables the PIM protocol on a specific interface.

Sets the interval between successive State Refresh messages origi-
nated by a router.

Sets the limit at which a router will not forward successive State 
Refresh messages if they are received at less than the interval.

Sets the Time to Live to be used in a router’s originated State 
Refresh messages if the data packet’s Time to Live is not recorded.

Configures the period during which the (S,G) Join state will be 
maintained in the absence of (S,G) Join messages or explicit (S,G) 
local membership.