Alcatel-Lucent 6850-48 Reference Guide

PIM Commands

page 45-42

OmniSwitch CLI Reference Guide

Displays the static configuration of multicast group mappings for the PIM-Source Specific Multicast 
(SSM) mode.

N/A

N/A

OmniSwitch 6850, 6855, 9000, 9000E

• If the group prefixes configured for two or more rows in this table overlap, the row with the greatest 

prefix length value is used for the overlapping range.

• This command is supported only in the sparse mode.

-> show ip pim ssm group

Group Address/Pref Length   Mode  Override Precedence Status

---------------------------+-----+--------+----------+--------

224.0.0.0/4                 ssm   false    none       enabled

Release 6.3.1; command was introduced.

The 32-bit IP address for a multicast group, along with the mask length, 
shown in bits. The group IP address and mask are separated by a slash 
( / ). 

The PIM mode to be used for groups in this prefix. The possible values 
include asm, ssm, or dm.

Specifies this static RP configuration to override the dynamically 
learned RP information for the specified group(s).

Specifies the precedence value to be used for this static RP configura-
tion.

Displays whether this entry is currently enabled or disabled. Options 
include enabled and disabled.