Alcatel-Lucent 6850-48 Reference Guide
PIM Commands
page 45-52
OmniSwitch CLI Reference Guide
September 2009
Release History
Release 6.3.1; command was introduced.
Related Commands
MIB Objects
alaPimGroupMappingTable
alaPimGroupMappingOrigin
alaPimGroupMappingGrpAddress
alaPimGroupMappingPrecedence
alaPimGroupMappingRPAddress
alaPimGroupMappingPimMode
alaPimGroupMappingGrpPrefixLength
output definitions
Origin
The mechanism by which the PIM mode and RP for the group
were learned. The possible values include 'static RP' for local static RP
configuration, 'static SSM' for both SSM group configuration and
Dense Mode Group configuration, and 'BSR' for the PIM Bootstrap
Router mechanism.
were learned. The possible values include 'static RP' for local static RP
configuration, 'static SSM' for both SSM group configuration and
Dense Mode Group configuration, and 'BSR' for the PIM Bootstrap
Router mechanism.
Group Address/Prefix Length
The 32-bit IP address for a multicast group, along with the mask length,
shown in bits. The group IP address and mask are separated by a slash
( / ).
shown in bits. The group IP address and mask are separated by a slash
( / ).
RP Address
The IP address of the Rendezvous Point to be used for groups within
the group prefix. There is no RP address if the PIM mode is either SSM
or DM.
the group prefix. There is no RP address if the PIM mode is either SSM
or DM.
Mode
The PIM mode to be used for groups in this prefix.
Mapping Precedence
The precedence value of a particular row, which determines which row
applies to a given group address. Numerically higher values for this
object indicate lower precedences, with the value zero denoting the
highest precedence.
applies to a given group address. Numerically higher values for this
object indicate lower precedences, with the value zero denoting the
highest precedence.
Creates and manages the static configuration of a Source Specific Multi-
cast mode group mappings.
cast mode group mappings.
Creates and manages the static configuration of dense mode (DM) group
mappings.
mappings.
Adds, modifies, or deletes a static RP for a group (“modifies” applies
only to the RP address, since the table is indexed from group address
and mask parameters).
only to the RP address, since the table is indexed from group address
and mask parameters).