Alcatel-Lucent 6850-48 Reference Guide

QoS Policy Commands

OmniSwitch CLI Reference Guide

page 53-125

• Any condition parameters that the hardware supports will be used to classify the traffic; any condition 

parameters that are not supported by the hardware will not be used to classify traffic, and the event will 
be logged in the QoS log.

• Bandwidth and queue parameters may be specified when the action is created or may be specified as 

separate commands.

• Use the 

 command to activate configuration changes. 

• Use the no form of the command to remove a QoS action from the configuration. 

• If the snapshot command is entered after the policy action command is configured, the resulting 

ASCII file will include the following additional syntax for the policy action command: 

This syntax indicates how the action was created. The cli and ldap options may be changed by a user 
modifying the ASCII file; however, changing this setting is not recommended. The blt option indi-
cates a built-in action, this setting is not configurable.

-> policy action action1 accept

Release 6.1; command was introduced.

alaQoSActionTable

alaQoSActionName

alaQoSActionSource

alaQoSActionDisposition

alaQoSActionMinimumBandwidth

alaQoSActionMaximumBandwidth

alaQoSActionPeakBandwidth

alaQoSActionPriority

alaQoSActionShared

alaQoSActionMaximumBuffers

alaQoSActionMaximumDepth

alaQoSAction8021p

alaQoSActionTos

alaQoSActionTosRewriteMask

alaQoSActionDscp

alaQoSActionMapFrom

alaQoSActionMapTo

alaQoSActionMapGroup

Configures a condition associated with the action.

Applies configured QoS and policy settings to the current configuration. 

Displays information about policy actions.