Alcatel-Lucent 6850-48 Reference Guide
Policy Server Commands
OmniSwitch CLI Reference Guide
September 2009
page 54-5
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
If you change the port number, another entry is added to the policy server table; an existing port number is
not changed. To remove a port number, use the no form of this command with the relevant policy server
IP address and the port number you want to remove.
not changed. To remove a port number, use the no form of this command with the relevant policy server
IP address and the port number you want to remove.
Examples
-> policy server 222.22.22.2 port 345 user dirmgr password secret88 searchbase
ou=qos,o=company,c=country
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
DIRECTORYSERVERTABLE
directoryServerAddress
directoryServerPort
directoryServerAdminStatus
directoryServerPreference
directoryServerUserId
directoryServerAuthenticationType
directoryServerPassword
directoryServerSearchbase
directoryServerEnableSSL
parameter
default
admin
up
port_number
389 (SSL disabled)
636 (SSL enabled)
636 (SSL enabled)
preference
0
ssl | no ssl
no ssl
Displays information about policies downloaded from an LDAP server.