Alcatel-Lucent 6850-48 Reference Guide
Policy Server Commands
page 54-6
OmniSwitch CLI Reference Guide
September 2009
show policy server
Displays information about servers from which policies may be downloaded to the switch.
show policy server
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
This command displays basic information about policy servers. Use the show policy server long
command to display more details about the servers.
command to display more details about the servers.
Examples
-> show policy server
Server IP
Address
port
enabled
status primary
------+--------------+-----+---------+--------+--------
1
208.19.33.112
389
Yes
Up
X
2
208.19.33.66
400
No
Down
-
Release History
Release 6.1; command was introduced.
output definitions
Server
The index number corresponding to the LDAP server.
IP Address
The IP address of the LDAP server.
port
The TCP/IP port number used by the switch to connect to the policy
server.
server.
enabled
Whether or not the policy server is enabled.
status
The state of the policy server, Unkn, Up or Down.
primary
Indicates whether the server is the primary server; this server will be
used for the next download of policies; only one server is a primary
server.
used for the next download of policies; only one server is a primary
server.