Alcatel-Lucent 6850-48 Reference Guide
IP Multicast Switching Commands
page 55-108
OmniSwitch CLI Reference Guide
September 2009
Release History
Release 6.1.1; command was introduced.
Release 6.3.1; Querier Forwarding field added.
Release 6.3.4; Max-group and Max-group action field added.
Release 6.3.1; Querier Forwarding field added.
Release 6.3.4; Max-group and Max-group action field added.
Query Response Interval
(milliseconds)
(milliseconds)
Displays the time (in milliseconds) to reply to an MLD query message.
(The default value is 10000 milliseconds.) You can modify this param-
eter with the
(The default value is 10000 milliseconds.) You can modify this param-
eter with the
Last Member Query Interval
(milliseconds)
(milliseconds)
Displays the time (in milliseconds) to reply to an MLD query message
sent in response to a leave group message. (The default value is 1000
milliseconds.) You can modify this parameter with the
sent in response to a leave group message. (The default value is 1000
milliseconds.) You can modify this parameter with the
command, which is
Unsolicited Report Interval
(seconds)
(seconds)
Displays the time period (in seconds) to proxy any changed MLD
membership state. (The default value is 1 second). You can modify this
parameter with the
membership state. (The default value is 1 second). You can modify this
parameter with the
com-
Router Timeout (seconds)
Displays the MLD router timeout in seconds (The default value is 90
seconds.) You can modify this parameter with the
seconds.) You can modify this parameter with the
command, which is described on
Source Timeout (seconds)
Displays the IGMP source timeout in seconds (The default is 30 sec-
onds.) You can modify this parameter with the
onds.) You can modify this parameter with the
command, which is described on
Max-group
The global or VLAN specific maximum group count allowed.
Max-group action
The action to be taken when the group membership limit is exceeded.
output definitions