Manualsbrain.com
  1. Manuals
  2. Brands
  3. Alcatel-Lucent
  4. 6850-48
  5. Reference Guide

Alcatel-Lucent 6850-48 Reference Guide

Download
Page of 3444
Learned Port Security Commands
OmniSwitch CLI Reference Guide
September 2009
page 18-21
Examples
-> show port-security
Port:  7/10
 Operation Mode   :                ENABLED,
 Max MAC bridged  :                      1,
 Trap Threshold   :               DISABLED,
 Max MAC filtered :                      5,
 Low MAC Range    :      00:00:00:00:00:00,
 High MAC Range   :      ff:ff:ff:ff:ff:ff,
 Violation        :               RESTRICT 
MAC Address 
VLAN 
TYPE
-------------------+------+-------------------
00:20:95:00:fa:5c      1 
STATIC
Release History
Release 6.1; command was introduced.
Release 6.1.5; config-mac-range parameter was removed.
Release 6.1.5; Mac Filtered MAC allowed field was added.
Release 6.3.1; Trap Threshold field was added.
output definitions
Port
The module slot number and the physical port number on that module. 
Operation Mode
The Learned Port Security operation status for the port (enabled or dis-
abled). Configured through the 
 command.
Max MAC bridged
The maximum number of bridged MAC addresses that are allowed on 
this port. Configured through the 
Trap Threshold
The number of bridged MACs to learn before sending a trap. After this 
number is reached, a trap is sent out for every MAC learned thereafter. 
If disabled is displayed in this field, the trap threshold is not in force.
Configured through the 
 command.
Max MAC filtered
The maximum number of filtered MAC addresses that the LPS port can 
learn. Configured through the 
 command.
Low MAC Range
MAC address that defines the lower end of a MAC address range. Con-
figured through the 
High MAC Range
MAC address that defines the higher end of a MAC address range. 
Configured through the 
 command.
Violation
The security violation mode for the port (restrict or shutdown). Con-
figured through the 
MAC Address
An individual authorized MAC address. Configured through the
 command.
VLAN
The VLAN to which the LPS port belongs.
TYPE
Indicates if the MAC address was dynamically learned or statically 
configured as an authorized MAC address for the port. Dynamic MAC 
addresses become configured MAC address entries after a configura-
tion save and switch reboot.