Alcatel-Lucent 6850-48 Reference Guide
Ethernet Port Commands
OmniSwitch CLI Reference Guide
September 2009
page 19-87
show interfaces transceiver
Displays the DDM information for the specified transceivers.
show interfaces transceiver [slot[/port[-port2]]] transceiver [ddm | W-Low | W-High | A-Low |
A-High | actual]
A-High | actual]
Syntax Definitions
slot
Slot number to display.
port
Port number of the interface to display.
port2
Last port number in a range of ports to display.
ddm
Displays the administrative and trap status of the DDM feature.
W-Low
Displays the Warning Low threshold for temperature, voltage, current,
RX power and TX power.
RX power and TX power.
W-High
Displays the Warning High threshold for temperature, voltage, current
RX power and TX power.
RX power and TX power.
A-Low
Displays the Alarm Low threshold for temperature, voltage, current RX
power and TX power.
power and TX power.
A-High
Displays the Alarm High threshold for temperature, voltage, current RX
power and TX power.
power and TX power.
actual
Displays the Actual values for temperature, voltage, current RX power
and TX power.
and TX power.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• Transceiver DDM capability will vary based on the transceiver manufacturer.
Examples
-> show interfaces transceiver W-Low
Slot/Port Temp C Voltage(V) Current(mA) Output(mW) Input(mW)
---------+------+----------+-----------+----------+---------+
1/1
48
5.15
50 1.78 1.78
1/2 47 5.35 49 1.75 1.75
1/3 NA NA NA NA NA