Alcatel-Lucent 6850-48 Reference Guide
Ethernet Port Commands
page 19-88
OmniSwitch CLI Reference Guide
September 2009
-> show interfaces transceiver A-High
Slot/Port Temp C Voltage(V) Current(mA) Output(mW) Input(mW)
---------+------+----------+-----------+----------+---------+
1/1
50
5.75
75
2.10 2.10
1/2 50 5.95 65 2.10 2.10
1/3 NA NA NA NA NA
-> show interfaces 1/1 transceiver
Threshold Temp C Voltage(V) Current(mA) Output(mW) Input(mW)
------------+------+----------+-----------+----------+---------+
Actual
50 1.95(WL) 75
3.11(AH) 2.10
Alarm High
120 5.75
100
3.10
3.10
Warning High 90 3.00
90
3.00
3.00
Warning Low 10 2.00
60
1.00
0.00
Alarm Low
-5 1.75
20
0.50
0.10
-> show interfaces transceiver ddm
DDM Status : enable
DDM Trap Status : disable
Release History
Release 6.4.2; command was introduced.
output definitions
Slot/Port
Interface slot and port numbers.
Temp C
The transceiver temperature, in degrees centigrade.
Voltage (V)
The transceiver supply voltage, in volts.
Current (mA)
The transceiver transmit bias current, in milliamps.
Output (mW)
The transceiver output power, in milliwatts.
Input (mW)
The transceiver received optical power, in milliwatts.
DDM Status
The administrative status of DDM.
DDM Trap Status
The administrative status of DDM traps.
Actual
The real-time values indicated by the transceiver.
Values displayed
in parentheses indicate the Warning or Alarm value that has
been reached.
been reached.
Alarm High (AH)
Indicates the value at which the transceiver’s functionality may be
affected.
affected.
Warning High (WH)
Indicates the transceiver is approaching the High Alarm value.
Warning Low (WL)
Indicates the transceiver is approaching the Low Alarm value.
Alarm Low (AL)
Indicates the value at which the transceiver’s functionality may be
affected.
affected.
N/A
Indicates the transceiver does support DDM.