Alcatel-Lucent 6850-48 Reference Guide
VLAN Management Commands
page 21-28
OmniSwitch CLI Reference Guide
September 2009
show vlan ipmvlan
Displays IPMVLAN information for a specific IPMVLAN, a range of IPMVLANs, or all the IPMVLANs.
show vlan ipmvlan [ipmvlan-id1[-ipmvlan-id2]]
Syntax Definitions
ipmvlan-id1
The IPMVLAN ID number (1–4094).
-ipmvlan-id2
The last IPMVLAN ID number in a range of IPMVLANs that you want
to display (e.g. 10-12 specifies VLANs 10, 11, and 12).
to display (e.g. 10-12 specifies VLANs 10, 11, and 12).
Defaults
By default, the configuration for all IPMVLANs is displayed.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Use the ipmvlan-id parameter with this command to display information for a specific IPMVLAN or a
range of IPMVLANs.
range of IPMVLANs.
Examples
-> show vlan ipmvlan
stree
vlan type admin oper 1x1 flat name
------+------------+-------+--------+--------------+--------------
1201 Vstk ipmtv on on on on VLAN 1201
1202 Vstk ipmtv on on off off VLAN 1202
1203 Entp ipmtv on on off off VLAN 1203
1204 Vstk ipmtv on on on on VLAN 1204
1205 Entp ipmtv on off on off VLAN 1205
-> show vlan ipmvlan 1201-1203
stree
vlan type admin oper 1x1 flat name
------+------------+-------+--------+--------------+--------------
1201 Vstk ipmtv on on on on VLAN 1201
1202 Vstk ipmtv on on off off VLAN 1202
1203 Entp ipmtv on on off off VLAN 1203
-> show vlan ipmvlan 50
Name : VLAN 50,
IPMV Mode : Enterprise IPMVLAN
Administrative State: enabled,
Operational State : disabled,
1x1 Spanning Tree State : disabled,
Flat Spanning Tree State: disabled,