Alcatel-Lucent 6850-48 Reference Guide

VLAN Management Commands

page 21-26

OmniSwitch CLI Reference Guide

Release 6.2.1; command was introduced.

VLAN Spanning Tree status for the VLAN in the 1x1 mode: on 
(enabled) allows the Spanning Tree algorithm to determine the state of 
VLAN ports (forwarding or blocking); off (disabled) prevents Span-
ning Tree algorithm from controlling VLAN ports, leaving active ports 
in a forwarding state. Configured through the 

VLAN Spanning Tree status for the VLAN in the flat mode: on 
(enabled) allows the Spanning Tree algorithm to determine the state of 
VLAN ports (forwarding or blocking); off (disabled) prevents Span-
ning Tree algorithm from controlling VLAN ports, leaving active ports 
in a forwarding state. Configured through the 

VLAN Authentication status: on (enabled) or off (disabled). Use the 

 command to change the VLAN Authentication 

status.

IP router interface status: on (IP interface exists for the VLAN) or off 
(no IP router interface exists for the VLAN). Use the 

 com-

mand to define an IP router interface for a VLAN.

IPX router interface. Shows the IPX address, RIP mode, and encapsula-
tion for the VLAN’s IPX router interface, if one is defined. Use the 

 command to configure IPX router interfaces. 

Mobile tagging status: on (enabled); off (disabled). Configured through 
the 

 command. 

The user-defined text description for the VLAN. By default, the VLAN 
ID is specified for the VLAN description.

Displays a list of VLANs configured on the switch.

Displays VLAN port assignments.