Alcatel-Lucent 6850-48 Hardware Manual
Power Cords
OmniSwitch 6850 Series Chassis and Hardware Components
page 2-68
OmniSwitch 6850 Series Hardware Users Guide
September 2009
Power Cords
Since the power cord is the switch’s only disconnect device, it should be plugged into an easily accessible
outlet. In the event that your power cord is lost or damaged, refer to the specifications below.
outlet. In the event that your power cord is lost or damaged, refer to the specifications below.
Specifications
The power cord to be used with 115 Volt configuration is a minimum type SJT (SVT) 18/3, rated at 250
Volts AC, 10 Amps with a maximum length of 15 feet. One end terminates in an IEC 320 attachment plug
and the other end terminates in a NEMA 5-15P plug.
Volts AC, 10 Amps with a maximum length of 15 feet. One end terminates in an IEC 320 attachment plug
and the other end terminates in a NEMA 5-15P plug.
The power cord to be used with 230 Volt configuration is minimum type SJT (SVT) 18/3, rated 250 Volts
AC, 10 Amps with a maximum length of 15 feet. One end terminates in an IEC 320 attachment plug and
the other end terminates as required by the country where it will be installed.
AC, 10 Amps with a maximum length of 15 feet. One end terminates in an IEC 320 attachment plug and
the other end terminates as required by the country where it will be installed.
European cords must be Harmonized (HAR) type. Refer to the information below for power plug types by
region:
region:
Power Cord Types
North America
NEMA 5-15-P (US), C22.2, No. 42 (Canada)
United Kingdom / Ireland
BS 1,363
Europe
CEE 7/7
Japan
JIS 8,303
Australia
AS 3,112
India
BS 546
Italy
CIE 2,316
Switzerland / Liechtenstein
SEV 1011
Denmark / Greenland
SRAF 1,962 / D816 / 87
Argentina
AR1-10P