Alcatel-Lucent ls 6248 User Guide

Command Line Interface

460

4

The 

 Interface Configuration (Ethernet) mode command configures the 

administrative mode of inline power on an interface.

 

•

Enables the device discovery protocol and, if found, supplies power 

to the device.

•

never — 

Disables the device discovery protocol and stops supplying power 

to the device.

The device discovery protocol is enabled.

Interface Configuration (Ethernet) mode

There are no user guidelines for this command.

The following example enables powered device discovery protocol on port 1/e1, so 
that power will be supplied to a discovered device.

Configures the administrative mode of inline power on an 

interface.

ICE

Adds a comment or description of the powered device type to 

enable the user to remember what is attached to the interface. To 

remove the description, use the no form of this command. 

ICE

power inline priority Configures the inline power management priority of the interface. 

To return to the default configuration, use the no form of this 

command.

ICE

Configures the threshold for initiating inline power usage alarms. 

To return to the default configuration, use the no form of this 

command.

GC

Enables inline power traps. To disable inline power traps, use the 
no

 form of this command.

GC

Displays the information about inline power.

UE

.

Console(config)# 

 1/e1

Console(config-if)#