Руководство Пользователя для Alcatel-Lucent ls 6248
Command Line Interface
460
4
Power over Ethernet Commands
power inline
The
port inline
Interface Configuration (Ethernet) mode command configures the
administrative mode of inline power on an interface.
Syntax
power inline
{auto | never}
Parameters
•
auto —
Enables the device discovery protocol and, if found, supplies power
to the device.
•
never —
Disables the device discovery protocol and stops supplying power
to the device.
Default Setting
The device discovery protocol is enabled.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following example enables powered device discovery protocol on port 1/e1, so
that power will be supplied to a discovered device.
that power will be supplied to a discovered device.
Table 4-23. Power over Ethernet Commands
Command
Function
Mode
Page
Configures the administrative mode of inline power on an
interface.
ICE
Adds a comment or description of the powered device type to
enable the user to remember what is attached to the interface. To
remove the description, use the no form of this command.
ICE
power inline priority Configures the inline power management priority of the interface.
To return to the default configuration, use the no form of this
command.
ICE
Configures the threshold for initiating inline power usage alarms.
To return to the default configuration, use the no form of this
command.
GC
Enables inline power traps. To disable inline power traps, use the
no
no
form of this command.
GC
Displays the information about inline power.
UE
.
Console(config)#
interface ethernet
1/e1
Console(config-if)#
power inline auto