Turtle Beach ak-r8 User Guide

Page 38 

After selecting the speaker configuration to match your speaker system, you can check if the 
speakers are properly connected by clicking on the speaker icon to play a test signal on that 
speaker.  
The buttons at the bottom of the speaker icon section, 
labeled Test and Loop, operate as follows: 
ƒ  Test: When this button is clicked, the test signal 

automatically advances to the next speaker so that all 
of the speakers in a configuration are played once. 

ƒ  Loop: When this button is enabled, if the Test button 

is clicked, the test signal will continuously play in 
sequential order on all speakers until the Test button is 
turned off. If the Loop button is enabled with the Test 
button off, clicking a speaker will repetitively play the 
test signal on that speaker until the Loop button is 
turned off. 

Master Volume: Controls the volume of all speakers.  
Pan: Controls L/R balance of all speakers.  
Mute: Mutes all speakers when activated.  

The volume controls for each speaker in the selected 
configuration are located to the right of the Master Volume 
slider. The number of sliders will depend on the speaker 
configuration (2 sliders for stereo, 4 sliders for quad, etc.).  
Lock Button: Click the Lock button, located at the bottom of 
the section, to make the L/R slider pairs move together when 
adjusting the levels. 
Reset Button: Click the Reset button to return all of the 
speaker levels to their default settings.  

The Speaker Equalizer button, labeled “…” next to the Master Mute button, activates the 
Speaker Equalizer screen when clicked. The function of the Speaker Equalizer is described 
in a later section.