Turtle Beach ak-r8 User Guide

   

 

 

Page 39

 

This section summarizes the state of major control panel settings: 
ƒ  Stereo to Multi-Speaker: Indicates that a stereo source 

will be routed to all of the speakers because the Speaker 
Configuration is set to either 4, 5.1 or 7.1 speaker mode. 
This allows the stereo source to play in surround sound. 
To listen to a stereo source with two speakers when using 
4, 5.1 or 7.1 speakers, set the Speaker Configuration to 2 
Speaker. 

ƒ  Multi-channel to Sub: Indicates that the speaker 

channels are being routed to the sub-woofer output. This  
mode is set by clicking the Speaker Options button in the 
Speakers Tab. 

ƒ  Master Equalization: Indicates that the Master Graphics 

Equalizer is enabled, therefore the system frequency response may be modified from its 
“flat” setting by the Equalizer.  

ƒ  Speaker Equalization: Indicates that the Speakers Equalizer is enabled, therefore the 

individual speaker frequency response may be modified from its “flat” setting by the 
Equalizer.  

ƒ  Speaker Position: Indicates that the speaker positions in the Speaker Position section 

of the Effects Tab have been moved. If you find that the sound is not emanating from 
the speaker being tested, and this LED is on, check the Speaker Position settings to see 
if the speaker signal has been panned to a different location. 

ƒ  Environments: Indicates that the Environments in the Effects Tab are enabled, which 

adds a reverberation or “concert hall” effect to the sound. 

ƒ  Key Shifter: Indicates that the Pitch Shifter in the Effects Tab is enabled, therefore the 

digital audio output may be being altered by this effect. 

ƒ  Center Canceller: Indicates that the Center Canceller effect in the Effects Tab is 

enabled, which removes audio signals that are panned to the center of a stereo source. 
This is typically used to remove the voice from a song.