AvMap ekp iii c User Manual

the screen. The EKP-III will store 10 radials.

To project a radial, first select the object with the cursor, then:

Using the cursor keys enter the Bearing and press ‘ENTER’. The Distance box is now

active; using the cursor keys enter the Distance for the line to extend and press ‘ENTER’.

To remove a radial, select the object icon or the radial line with the cursor, then:

A Warning message appears asking if you would like to remove the radial. Press

‘ENTER’ to confirm or ‘ESC’ to exit.

To remove all radials stored in the EKP-III (see also Par. 14.9):

The A-B Function allows you to calculate distance and bearing between two specified points

(“A” and “B”). The distance and bearing will appear in the A-B data field box at the top of the

screen. (This must be selected for display; see Data Window, Par. 3.2).

To measure two points:

You can also measure distance from the current fix position using the A-B feature.

From Home or Auto Zoom mode:

This will place “A” at the current fix position, then:

This line will remain on the screen until it is deactivated. To deactivate:

When editing the waypoint, select the 

icon for the waypoint. Any Waypoint with this icon

wil activate a user Waypoint Arrival Alarm if this feature is turned on in the System Setup -

Alarm Setup Menu.

The EKP-III provides storage for 1000 Waypoints. These can be a combination of

User Waypoints or Flight Plan Waypoint storage.

User Waypoints can be edited, searched and used as Waypoints within a Flight Plan.

User Waypoints can be created from the Moving Map screen or via the Database page (see

Database, Chapter 8 for entering Waypoints from the Database).

EKP III USER MANUAL

31