AvMap ekp iii c User Manual
14.3.6 CLEAR EVENT LOG
Clears the Event Log memory and starts new:
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “ALARM SETUP” + ‘ENTER’ +
“CLEAR EVENT LOG” + ‘ENTER’
“CLEAR EVENT LOG” + ‘ENTER’
After pressing ‘ENTER’ a window appears: press ‘ENTER’ to confirm deletion (or
‘ESC’ to abort function). The message “DONE” will appear confirming the action.
14.4 TRACK SET-UP
Track is the actual course traveled, which the EKP-III can display as a series of connected dots.
The interval setting can be defined by the pilot.
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “TRACK SETUP” + ‘ENTER’
14.4.1 TRACK DISPLAY
Track display On will display track history on the Moving Map. All track data stored in the unit
memory will be displayed. The default setting is Off.
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “TRACK SETUP” + ‘ENTER’ +
“TRACK DISPLAY” + ‘ENTER’
“TRACK DISPLAY” + ‘ENTER’
14.4.2 TRACK RECORDING STEP
The EKP-III stores up to 5,000 data points to display a pattern of aircraft movement (Track).
After 5,000 intervals the oldest is deleted with each new position fix point. The following
options assist in getting the most track memory for your type of flying.
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “TRACK SETUP” + ‘ENTER’ +
“TRACK RECORDING STEP” + ‘ENTER’
“TRACK RECORDING STEP” + ‘ENTER’
Distance - will store a fix point at the specified interval of distance.
Time - will store a fix point at the specified interval of: 5 sec, 30 sec, 1 min.
Auto - this allows for the most efficient use of the memory as the software will deter-
mine when to store a fix point based on straight and curved flight paths.
The default setting is Auto.
14.4.3 CLEAR TRACK
Deletes all of the Track history and begins new.
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “TRACK SETUP” + ‘ENTER’ +
“CLEAR TRACK” + ‘ENTER’
“CLEAR TRACK” + ‘ENTER’
After pressing ‘ENTER’ a window appears; press ‘ENTER’ to confirm deletion or
‘ESC’ to abort function. The message “DONE” will appear confirming the action.
90
EKP III USER MANUAL