AvMap ekp iii c User Manual
14.5.5 FUEL UNIT
Fuel units are used in the Fuel Consumption Calculator.
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“FUEL” + ‘ENTER’
“FUEL” + ‘ENTER’
You may select Gallons (GAL), Liters (LIT), Kilograms (KG), Pounds (LB) or British
Gallons (BGAL). The default setting is Gallons.
14.5.6 DESCENT RATE
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“DESCENT RATE” + ‘ENTER’
“DESCENT RATE” + ‘ENTER’
The Descent Rate is used in the Vertical Navigation calculation. It can be displayed as Feet per
Minute (FT/MIN) or Meters per second (M/S) or Degrees (DEG). The default setting is Feet
per Minute.
14.5.7 TEMPERATURE
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“TEMPERATURE” + ‘ENTER’
“TEMPERATURE” + ‘ENTER’
The Temperature is used in the Wind Calculation. You may select Fahrenheit (F) or Celsius (C).
The default setting is Celsius.
14.5.8 NORTH REFERENCE
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“NORTH REFERENCE” + ‘ENTER’
“NORTH REFERENCE” + ‘ENTER’
The North Reference for calculations can be shown as Magnetic or True (Magnetic
uses an automatic adjustment for local magnetic variation).
The North Reference used for wind computations and runway information is always
Magnetic; all other heading, bearing and Track computations are based on the user-selected ref-
erence. The default setting is Magnetic.
14.5.9 COORDINATE SYSTEM
>‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“COORDINATE SYSTEM” + ‘ENTER’
“COORDINATE SYSTEM” + ‘ENTER’
Sets the display of the Latitude/Longitude coordinates system among: DDD MM SS (Degrees,
Minutes, Seconds); DDD MM.mm (Degrees, Minutes - to two decimals); DDD MM.mmm
(Degrees, Minutes - to three decimals); UTM, OSGB.
The default setting is DDD MM.mm.
92
EKP III USER MANUAL