MPIO hs 100 User Guide

Page of 15
English
5
English
4
HS100 is a small, light storage device with a capacity of 1.5 GB
of its 1-inch hard disk. It commands the strength of both a
large capacity HDD and a small Flash Memory storage device.
It is also capable of fast data transmission by using the USB
2.0 Interface.  
1. Introduction
Product Code
HS100
Capacity  
1.5GB
Interface
USB 2.0(compatible with USB 1.1)
Transfer Rate
1. With USB 2.0: Maximum 38Mbps  
2. With USB 1.1: Maximum 8Mbps
Operating Temperature  -10°C ~ 50°C 
Range 
Dimensions (mm) 
43.6(W) x 84.5(H) x 14.8(D)
Weight (g)
56.5g
Platform OS
Windows 98/SE/ME/2000/XP
Macintosh OS Version 9.x later
2. Specifications
HS100 is initially formatted in FAT32. Actual usable capacity can be
changed via the logic file system regardless of the physical capacity
of HS100 (1.5GB).  
* The warranty does not cover PC connections with the use of
extended cords like the USB hub, etc.  
* Connection of HS100 to the USB 1.1 Host Adapter enables you
to operate at the speed of the USB 1.1.  
* You need to mount a USB 2.0 Host Adapter on the computer to
achieve maximum transmission speed when using the device.  
You should be fully aware of the notice below, before using
the product.  
The company does not take the responsibility for the defect
of the product (accessory, connecting device etc.), damage,
data loss, accident & disorder etc., occurred from not fully
understanding the notice below, so please be sure to check
this notice.  
• Do not use the product for the other purpose except for the mat-
ters described in the manual.  
• Pay attention not to hurt your hand while you touch a product box,
manual, accessory etc.   
• Hard disk is sensitive to impact. Pay attention not to have a
severe impact on the product, might cause a trouble or a damage.  
• Pay attention not to use the device or leave it alone in places with
high/low temperature, high humidity, big thermal difference, and
by the strong magnetic field.  
• Remember that liquid (water, beverage etc.) not leaked into the
device.  
• The device that you discretionary disassembled or remodeled can
not be provided with a free service and can be excluded from the
service areas, so pay special attention to this.  
• The company shall not be held liable for data lost and damaged
during data transmissions between HS100 and your computer.  
• Be sure to backup your data during data storage. Device malfunc-
tion, operational errors, external shock, or power failure can cause
loss of stored data. The company does not assume any liability for
such occurrences. Please take proper precaution 
• Customers must back up the data stored in the device before
requesting for the service. For the service-requested device, the
data are assumed to have been backed up by customers ; we do
not provide any data backup service separately. We assume no
liability for any data loss during the service.  
• Please plug or unplug the cable by holding the plugs not by
pulling out the cable, to prevent internal line breaking.   
• Do not give an impact to the connected part while the Computer is
connected to the device.  
• When the device is covered with foreign particles, please wipe off
it with soft cloth or clean towel and be careful not to use chemi-
cals 
3. Safety Precautions
HS100-Eng_Bestbuy  8/12/97 8:23 PM  Page 4