MPIO hs 100 User Guide

X -F

ILE SEC U R ITY

D R

I

VER

(Ver 1.0)

HS100

X -M

A ILER

HS100

User's Guide

Installation CD

Extension USB Cable

Case

Necklace Strap

1. USB Terminal: insert this into the computer's USB terminal.  

1. USB Terminal

2. LED display

When connecting the device to the computer with a USB extension
cable, connect terminal A of this cable to the USB terminal of the
computer. Then insert the HS100  USB terminal into USB extension
cable B.

2. LED display: When the device is connected to the PC, the light

on the LED display is turned on when data is being
transmitted.  

• Green light - this indicates the connection of the device to the

computer when power is turned on.  

• Red light - indicates that the disk is transmitting the data.  

Removing the device from the computer right after data transmis-
sion increases the risk of data loss and damage to the device. Wait
until the device completes the recording of the data. Then check
whether the LED color has changed to green. Only then it is safe to
remove the device from the computer. Simply follow the instructions
in "Removing the device from the computer" on page 12.

Terminal A

Terminal B

HS100-Eng_Bestbuy  8/12/97 8:23 PM  Page 6