Printronix SL4M User Manual
144
Chapter
4
Saving A Configuration
Reset Head Data
Resets all printhead statistics values (Head Prt Dist and Head On Time) to
zero.
zero.
Head Resolution
Displays the printhead resolution installed in dots per inch (203 dpi or
305 dpi).
305 dpi).
Head Voltage
Displays the applied printhead voltage.
Saving A Configuration
You can save up to eight different configurations to meet eight unique print job
requirements. These configurations are saved and stored in the printer and
are not lost when the printer is turned off.
requirements. These configurations are saved and stored in the printer and
are not lost when the printer is turned off.
NOTE: If the Protect Config. option is enabled, the new configuration will not
be saved until the existing configuration is deleted.
Follow these steps to save a new configuration:
1.
Press the
key to enter the menu configuration.
2.
Press the Right key until CONFIGURATION displays.
3.
Press the
↵ key to enter the CONFIGURATION menu.
4.
Press the Down key until the following option is selected:
5.
Press the Left or Right keys to cycle through the options (1-8).
NOTE: Factory is not listed because changes made to the factory
configuration cannot be saved under Factory.
..
.
CONFIGURATION
Save Config.
1*