Printronix SL4M User Manual
146
Chapter
4
Auto Save Configuration
has been saved in that configuration number. The first empty configuration
found is used as the open configuration.
found is used as the open configuration.
The Auto Save Configuration cannot save a configuration to the Factory
Configuration. If the active configuration is the Factory Configuration then the
Auto Save Configuration function must find an open configuration into which
to save the active configuration.
Configuration. If the active configuration is the Factory Configuration then the
Auto Save Configuration function must find an open configuration into which
to save the active configuration.
To disable the Auto Save Configuration, set Auto Save (in the Configuration
menu) to Disable. The Auto Save menu displays only if Admin User is set to
Enable in the Printer Setup menu.
menu) to Disable. The Auto Save menu displays only if Admin User is set to
Enable in the Printer Setup menu.
Auto Save Feature
When an operator has made a change to a menu and attempts to go Online
without saving the changes to a configuration, the following prompt displays:
without saving the changes to a configuration, the following prompt displays:
The active option is highlighted. The operator can use the Up and Down keys
to scroll through the different options. The keys will loop at the top and bottom
options. The
to scroll through the different options. The keys will loop at the top and bottom
options. The
↵
(Enter) key selects the highlighted option. The printer will go
Online after performing the selected option.
NOTE: Only the Up, Down, and Enter keys work at the Menu Changes
Detected prompt.
•
Save Permanently (default option). This option will cause the printer to
save the configuration to the active configuration and make the active
configuration the Power-Up default configuration. If the active
configuration is the Factory Configuration, the printer will save the
configuration to an open configuration and make that open configuration
the Power-Up default configuration.
save the configuration to the active configuration and make the active
configuration the Power-Up default configuration. If the active
configuration is the Factory Configuration, the printer will save the
configuration to an open configuration and make that open configuration
the Power-Up default configuration.
If there is no open configuration, the operator must decide which
configuration to overwrite. In this case the printer will display the Save
Configuration menu, otherwise, the printer will go Online.
configuration to overwrite. In this case the printer will display the Save
Configuration menu, otherwise, the printer will go Online.
•
Save Temporarily. Menu changes will be implemented, but will not be
saved once the printer is powered off.
saved once the printer is powered off.
•
Cancel Changes. This option will cause the printer to reload the Active
Configuration and then go Online.
Configuration and then go Online.
•
Restore Factory. This option will cause the printer to reload the Factory
Configuration and then go Online.
Configuration and then go Online.
Menu Changes Detected
Save Permanently
Save Temporarily
Cancel Changes
Restore Factory
Save Temporarily
Cancel Changes
Restore Factory
Press
↵
to Select