Toshiba f10-120 User Guide
User’s Manual
10-15
Troubleshooting
LAN
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4,
administrator. For more information on wireless communication, refer to
Chapter 4,
TV output signal
Problem
Procedure
Cannot access LAN
Check for a firm cable connection between the
LAN jack and the LAN HUB.
LAN jack and the LAN HUB.
Wake-up on LAN does
not work
not work
Make sure the AC adaptor is connected. The
Wake-up on LAN function consumes power even
when the system is off.
Wake-up on LAN function consumes power even
when the system is off.
If problems persist, consult your LAN
administrator.
administrator.
Problem
Procedure
Cannot access
Wireless LAN
Wireless LAN
Make sure the computer’s wireless
communication switch is set to on.
communication switch is set to on.
If problems persist, contact your LAN
administrator.
administrator.
Problem
Procedure
Display on TV is poor
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
NTSC (US, JAPAN), PAL (Europe).
No display
Try adjusting the contrast and brightness controls
on the external monitor.
on the external monitor.
If problems persist, contact your dealer.
If you turn the computer off in Standby mode while the display is on TV, the
computer will select either the internal LCD or an external computer CRT
as the display device.
computer will select either the internal LCD or an external computer CRT
as the display device.