Sony kdl-s23a11e User Guide

 GB

Improves the sound for individual channels in the case of distortion 
in mono broadcasts. Sometimes a non-standard broadcast signal 
can cause sound distortion or intermittent sound muting when 
watching mono programmes.
1

Press 

M

/

m

 to select “Low” or “High”, then press OK.

If you do not experience any sound distortion, we recommend 
that you leave this option set to the factory setting “Off”.

Press OK to select “Confirm”, then press OK.

Note
• You cannot receive stereo or dual sound when “Low” or “High” 

is selected.

• Not available when “System” is set to “L”.

Skips unused analogue channels when you press PROG +/- to 
select channels. (You can still select a skipped channel using the 
number buttons.)
1

Press 

M

/

m

 to select “Yes”, then press OK.

Press OK to select “Confirm”, then press OK.

To restore a skipped channel, select “No” in step 1.

Records the scrambled channel selected when using a decoder 
connected to the scart connector 

/

2 either directly or via a 

VCR.
Note

Depending on the country/region selected for “Country” (page 29), this 
option may not be available. 

Press 

M

/

m

 to select “On”, then press OK. 

Press OK to select “Confirm”, then press OK. 

To cancel this function afterwards, select “Off” in step 1.

Attenuates the RF signal. In case of a strong RF signal, some video 
interference may be displayed.
1

Press 

m

/

M

 to select “On”, then press OK.

Press OK to select “Confirm”, then press OK.

This option cannot be used if “AV2 Output” is set to “D-TV” (page 26)