Toshiba L505-S5966 User Guide

Page of 234
186
If Something Goes Wrong
Resolving a hardware conflict
Modem problems 
(Available on certain models)
This section lists common modem problems.
The modem will not receive or transmit properly.
Make sure the cable from the modem to the telephone line is firmly 
connected to the computer’s modem port and the telephone line 
jack.
Check the communications parameters (baud rate, parity, data 
length and stop bits) specified in the communications program. It 
should be set up to transmit at 300, 1200, 2400, 4800, 9600, 14400, 
28800, 33600 bps (bits per second) or higher. Refer to the 
program’s documentation and the modem manual for information 
on how to change these settings.
The modem is on, set up properly but still does not transmit 
or receive data.
Make sure the line has a dial tone. Connect a telephone handset to 
the line to check this.
The other system may be busy or off line. Try making a test 
transmission to someone else.
For more information regarding your system’s V.92 modem, visit 
the Toshiba Web site at 
Wireless networking problems
This section provides general troubleshooting tips for networking 
problems, specifically wireless (Wi-Fi
®
) networking.
The terms and concepts used assume a basic understanding of 
networks, and may be for more advanced users. If you need 
assistance or if you are not familiar with the terminology, please see 
Windows
®
 Help and Support or contact your computer technician.
Verify that your computer can detect access points or routers. If 
it can detect a Wi-Fi
®
 access point or router then it may be a 
configuration issue.
Verify that signal strength is good using the utility provided 
with the Wi-Fi
®
 adapter.
NOTE