Quantum atl 7100 User Guide
Chapter 2 Operating the Library
Operating Procedures
Quantum|ATL 7100 Series Library Operator’s Guide
17
Working With
Tape Cartridges
Tape Cartridges
2
Applying Bar Code Labels to Cartridges
2
A bar code label is the identification for the cartridge. Apply a bar
code label to all cartridges used in the library. When applying:
code label to all cartridges used in the library. When applying:
•
Only use the bar code labels provided with the library.
•
Apply the bar code label to the front face (see
Figure 10 Bar Code
Label on a Tape
Cartridge
Label on a Tape
Cartridge
Adding Tape Cartridges Through the Load Port
2
To add a tape cartridge through the load port:
1
Verify that each cartridge has a bar code label.
Note:
Enable the auto load option before performing this task
(see
(see
Caution:
DO NOT USE CompacTape I
, CompacTape II
or
CompacTape IIIXT
tape cartridges in this library.
Caution:
Examine all cartridges before adding them to the
library. Look for label stock or foreign material that
may be clinging to the cartridges.
library. Look for label stock or foreign material that
may be clinging to the cartridges.
Bar code label