Mitsubishi WS-55517 User Manual

Transport  buttons (rewind, 

play forward, stop, pause and 
record) on the remote control 
are located in the bottom 
section of the remote control.

If multiple recording devices are available in 
NetCommand, this setting allows you to choose the 
device to use when recording digital programs.  A 
digital recording can be made on either a digital or 
analog device although the quality will not be as good 
if recorded on an analog device.  For best playback 
quality, record digital programs on a digital recording 
device.  

If multiple devices were not connected and then 
added in the NetCommand setup, this setting will 
be unavailable (grayed out).  Analog recordings can 
only be made on the one analog device connected to 
Monitor Out (usually a VCR) and are not affected by 
this setting This feature is most useful when recording 
from ChannelView™ (page 49). 

The Icon Order screen allows you to arrange the device 

icon order on the Device Selection menu to a different 
sequence, for ease of selection and operation.

To change the order, press ADJUST 

 ,

 ,  , or    to 

highlight the icon to be moved and then press ENTER.  
Press ADJUST 

 ,

 ,  or    to move the icon to the 

desired position and then press ENTER to select the 
icon. 

PAUSE

REW/REV

FF/FWD

PLAY

STOP

REC

CONNECT

STOP

Detailed information for setting up and editing the 
NetCommand menu is found in Chapter 3. Edit 
NetCommand allows you to add new devices, change 
or edit traditional and IEEE 1394 devices, turn devices 
and unused inputs On or Off, delete a single device or 
the entire setup configuration.  If you choose to delete 
the entire configuration, or if the NetCommand setup 
was cancelled, deleted or not completed, you can start 
at the Initial NetCommand screen.  The Review screen 
shows all devices connected to the TV, including IEEE 
1394 devices.  

NetCommand uses the Transport menu to control 

VCRs, DVDs, IEEE 1394 AV Discs, digital VCRs, and 

similar devices.  If you choose to turn off this menu 
when viewing the devices, the transport buttons 

(rewind, play forward, stop, pause and record) on the 

TV’s remote control will continue to operate these 

devices.  In the Device Selection menu selecting a VCR 
or DVD Player will automatically display the Transport 

menu.  Re-display this menu by pressing DEVICE 
MENU.

Select Transport menu functions by pressing ADJUST 

 or   and then ENTER.  For example, to pause 

playback, press ADJUST   or   to move to PAUSE, 
then press ENTER.  If a function is not possible, such 
as record for a DVD Player, the Transport menu button 
will be grayed out.