Mitsubishi WS-55517 User Manual

1. Press CH 

, 

 or number buttons to select the 

channel you want to add to the current SQV memory 
bank.

2. Press and hold the SQV button for about 2 seconds.  

When “SQV” and the memory bank number 
appear under the channel number, the channel has 
successfully been added.

1.  Press the SQV button and then the memory bank 

number.

2. Press the SQV button repeatedly until you see the 

desired channel.

3. While the channel number and SQV indicator (with 

correct bank number) are still displayed on the 
screen, press CANCEL.  If the CANCEL button is 

not pressed before the SQV indicator disappears 
automatically, the channel will not be removed.

4.  When the SQV indicator disappears, the channel 

has successfully been removed only from that bank.  

Other banks remain unchanged.

1.   Press the SQV button.

2.  To change memory banks, press a number button 

within 5 seconds of pressing the SQV button.

3.  Press the SQV button repeatedly to cycle through 

the channels available in that bank.

SQV (SuperQuickView™) allows you to put together  

lists of your favorite channels from Antenna-1 and 

Antenna-2. You can store channels in any of the 9 

different SQV memory banks.  You can also store the 
same channel in multiple memory banks.  Once you 

have added a channel to an SQV memory,  “SQV” and 
the memory bank number will appear under the tuned 

channel number on the TV screen.

1.  Select the channel by pressing  ADJUST  

 or  

 

using the Channel text box or press CH 

 or 

.

2. Highlight the bank (SQV1-SQV9).

3. Press ENTER to check mark the selected SQV 

memory bank.

4. Repeat for additional channels or banks.

1.  Highlight the box for the SQV bank number.

2. Press ENTER to remove the checkmark.